The Benefits of a Central AC Unit

Central air conditioning systems use ductwork to distribute cooled air throughout the rooms. The flow of air is controlled by an air handler which has a filter that is used to remove particles.

The unit is usually housed in a small enclosure located outside the home. Its quiet operation improves your peace by preventing the constant noise or whirr of window AC units from disturbing indoor serenity.

Energy Efficiency

Central air conditioners consume more energy than wall-mounted units, modern systems are more efficient than models of the past. The pollution-causing R22 refrigerant was phased out by 2006 and replaced with 410A. Manufacturers are also continuously developing new technologies to make their systems more efficient and use less energy.

Central AC systems, unlike window AC units, which are made to cool the space within which they’re located, can distribute cool air evenly throughout your home using air ducts. The cooling process starts when your thermostat signals that the air handler must begin cycling. The air handler pulls warm air from your living space and then passes it over the evaporator coil that is filled with cool refrigerant. The heat that is released into the air causes refrigerant absorb energy and transform into gas. The refrigerant then gets pumped to the outdoor unit, where the compressor raises its temperature and pressure. As it pumps, the heat is pushed off the evaporator back into your home, where it will be cooled and distributed through the ductwork.

Central AC systems are the most efficient when it comes down to regulating the temperature in large areas. They can cool rooms that are further from one AC unit and also have higher energy efficiency.

It could be that, based on the level of insulation and sealing your home is and also the arrangement, a mini-split air conditioner will use less energy than central air conditioning. Mini-splits are different from central ACs, however they are more efficient, as they do not rely on the ductwork. Ductwork leaks can cause the system overwork in order to cool your home to the desired temperature. Talk to an HVAC specialist from your local Dallas heating company if you want to know more about energy efficient options for cooling your house. They can help you find the best solution for your requirements.

Convenience

Central air conditioning systems aren’t only efficient and comfortable, but they also offer a great deal of convenience. They can cool your entire office or home in only one unit and don’t need vents like window units. They’re also generally equipped with top-quality air filters that can help keep pollutants and allergens out of the air. This is especially helpful for those suffering from allergies or respiratory conditions.

Central AC is a popular cooling system, and with good reason. It’s perfect for homes with ductwork and want an effective cooling solution. These systems can cool all rooms with just one vent. They can also be paired with thermostats that are zoned for home use that allow you to manage the cooling needs of different areas in your house.

This is the most commonly used AC system. It works similarly similar to furnaces. Central air conditioners are comprised of a large outdoor unit that blasts warm air and a smaller inside unit that pulls hot or cold air from the ductwork. The refrigerant is pumped out of the air handler through the lines, absorbing heat. The cool air is pushed back into air handler and circulated to other rooms through the ductwork.

A further benefit of a central air conditioning system is that it can help to reduce humidity. This is especially crucial in our humid climate. The air handler can remove excess moisture from your ductwork and then release it outside. This helps prevent the growth of mildew and mold.

It’s time to replace your cooling system if it is older than 15 years. A new, high quality AC system can help you save money on energy costs as well as protect the integrity of your ductwork. Contact Chancey & Reynolds to learn more about our cooling solutions. We can assist you in selecting the best air conditioner to meet your budget and requirements.

Maintenance

Like any major appliance, your air conditioner needs regular service to keep running smoothly. Some routine maintenance tasks can be handled by the homeowner while others should be left to certified professionals. Signing up for a maintenance agreement is the best way to be on the forefront of AC issues. These agreements typically include discounts on repairs and other perks, such as priority scheduling.

Clean the Condenser Unit

A condenser that is dirty will decrease air flow, decrease the efficiency of your system and increase energy costs. To prevent the accumulation of debris and dirt, turn off the power to the compressor unit prior to when you begin cleaning. Then, using the help of a garden hose and rag, gently clean the coil fins and blades of your fan to eliminate dirt leaves, twigs and twigs. After washing using a paper towel and a spray of sanitation to wipe and sanitize the fan blades. It is also recommended to straighten any bent fins that could be caused by wind or other weather conditions.

Line Sets

If your central air conditioner is over 10 years old, it is recommended to consult a professional to inspect the line sets, the copper tubes connecting the indoor air conditioning evaporator coil and the outdoor compressor and condenser unit. The lines are filled with refrigerant, and any cracks or corrosion can lead to leaks, which can result in inadequate cooling and more expensive cost of energy.

Air Filter

Change your air filter frequently to ensure that it is clean and improve the efficiency of your air conditioning system. The frequency varies depending on the frequency at which the AC is running, the number of furry family members, and the amount of dust you collect in your home. In general, a standard air filter will last for about two weeks or a month during the cooler months.

Condensate Drain Line

If the drain line for your condensation gets blocked by algae, mold, or bugs, the accumulated water on the evaporator coil will not be able to flush away. This can result in a flood-prone home, water damage and the growth of mold and mildew. The float switch near your indoor coil will shut down the system when it detects a blockage in the drain line.