The Benefits of a Central AC Unit

A central air conditioning system makes use of ductwork to deliver cool air to each room. Airflow is controlled by an air handler which includes a filter for capturing particulates.

The unit is typically housed in a small enclosure that is outside the home. The unit’s quiet operation can enhance your comfort, as it will stop the constant hum and whirrrr of window AC units from disrupting indoor serenity.

Energy Efficiency

While central air conditioners use more energy than wall-mounted units, modern systems are more efficient than models of the past. The pollution-causing R22 refrigerant was eliminated in 2006 and replaced by 410A. Manufacturers are also constantly developing new technologies to aid in the use of less energy.

Contrary to window AC units that are specifically designed to cool the room in which they are installed, central AC systems can distribute cool air throughout your entire home by using air ducts. The cooling process begins when your thermostat signals that the air handler needs to begin cycling. The air handler pulls warm air from your living areas, and it passes over the evaporator coil, which is filled with cool refrigerant. The heat that is released into the air causes refrigerant to absorb energy before it transforms into a gas. This refrigerant is then pumped to the outdoor unit, where the compressor raises its temperature and pressure. As it pumps it pushes the heat away from the evaporator coil, and then back into the house, where it’s cooled and distributed through your ductwork again.

Central AC systems are the most efficient when it comes down to regulating temperature in large spaces. They can cool rooms that are farther apart than a single AC unit and also have higher energy efficiency.

Depending on how well your house is insulated and sealed, and also the layout it’s possible that a mini-split could save you more energy than central air conditioning, though. Mini-splits differ from central ACs, but they are more efficient because they don’t require ductwork. Ductwork leaks and can cause the system overwork in order to cool your home to the desired temperature. If you’re interested in finding out more about energy-efficient options for cooling your home, speak to an HVAC expert at your local Dallas heating and air conditioning company. They’ll help you choose the best solution for your specific requirements.

Convenience

In addition to comfort and energy efficiency, central air conditioning systems offer many benefits. These systems are able to cool the entire house or office using only one unit, and do not require ducts as window units do. They also come with high-quality filters to help keep pollutants and allergens out of the air. This is especially helpful for people suffering from allergies or respiratory issues.

Central AC is a popular cooling system, and with good reason. It’s ideal for homes with ductwork and require a reliable cooling solution. These systems are able to supply cool air to every room from a single vent. They can also be used with home zoning, which permits you to manage the cooling requirements in different areas of your home with an intelligent thermostat.

This is the most commonly used AC system. It works similarly to a furnace. A central air conditioner has an outdoor unit that blows warm air, and a smaller indoor air handler that draws in cold or hot air through the ductwork. The refrigerant is pumped from the air handler through the lines, absorbing heat. The cool air is returned to the air handler in the home and circulated via the ductwork into other rooms.

Central air conditioning systems can also help reduce humidity. This is especially important in our humid climate. The air handler will remove excess moisture from your ductwork, and release it to the outside. This helps to prevent mold and mildew from growing.

If your cooling system is nearing 15 years old it’s time to consider replacing it with a new and better model. A new, high-end AC system can help you reduce your energy bills as well as protect the integrity of your ductwork. For more information about Chancey & Reynolds’ cooling solutions, contact us. We can assist you in choosing the right air conditioner for your budget and needs.

Maintenance

As with every major appliance, your air conditioner needs regular maintenance to run smoothly. Certain routine maintenance tasks can be completed by the homeowner while others should be left to certified professionals. Signing up for a maintenance agreement is the best method to keep on the top of AC problems. These contracts often come with discounts on repairs, as well as other benefits, like priority scheduling.

Clean the Condenser Unit

A condenser unit that is dirty will limit air flow, reduce the efficiency of the system and increase energy costs. To avoid the build-up of dirt and debris shut off the power supply to the compressor unit prior to when you begin cleaning. Then, with an outdoor hose and sponge, gently clean the blades and coil fins of your fan to eliminate dirt leaves, twigs and twigs. After washing the blades, wipe them with a towel and a sanitation spray. Also, straighten any bent fins that may have been caused by winds, or other weather conditions.

Line Sets

If your central air conditioner is more than 10 years old, it is recommended to get a professional to examine the line sets, the copper tubes connecting the indoor air conditioning evaporator coil with the outdoor compressor and condenser unit. The lines are filled with refrigerant. any cracks or corrosion can cause leaks that can result in inadequate cooling and more expensive costs for utility.

Air Filter

Change your air filter frequently to ensure that it is clean and improve the efficiency of your air conditioning system. The frequency of changing your air filter will depend on the frequency you run the AC and how many pets reside in the house and the amount of dust gets accumulated. A typical air filter will last for about two weeks to one month during the cooler season.

Condensate Drain Line

If your condensation drain line becomes clogged by algae, mold, or bugs, the water collected on the evaporator coil will not be able to flush away. This can lead to a flooded basement, water damage to your home, and even mold and mildew growth. To avoid this the float switch near the indoor evaporator will stop the system when it senses that the drain line is clogged.